User manual

WinPC-NC Economy Initial start-up with the machine
i
Incorrectly setted axis resolutions cause dimensional
inaccuracies and inexact speeds.
5.3. Definition of LPT port
By the next step you have to define in WinPC-NC Economy the used
LPT port respectively to determine its internal port address.
Ascertainment of
LPT port adress
In order to ascertain the port address you have to activate the device
manager in the system control. Please carry out the following
actions:
1. Open the device manager under My computer, system control,
hardware
2. Open the category connections COM and LPT and select the LPT
port to which the machine is connected.
3. Click with the right mouse button to properties followed by
resources
4. Note the port address under which the LPT port is integrated into
the system. With onboard ports it is normally port address
0378hex
5. In case if an additional second LPT port is available in the system
and you wish to make use of it with WinPC-NC Economy, you
only have to repeat step 2 – 4
Identification of the LPT port address by the device manager
- 86 -