User manual

WinPC-NC Economy What can WinPC-NC do ?
Sample of a 3 axis milling plant
Special features
Special features of WinPC-NC Economy:
• 32-bit arithmetic for an almost unlimited working range
• according to industry standards it is controlling by
clocking/direction signals any commercial steppermotor cards
and producing stepping frequencies up to 24 kHz
• as an alternative a version for the commonly known SMC stepper
motor cards is available, however with restrictions of the card
itself
• jog mode in exact steps using the cursor keys or the mouse
• graphical display with scale, zoom, shift, turning and reflecting
functions
• runs under Win2000 and XP without restrictions (date 6/06)
• axis resolutions, speeds, backlash compensation, ramp length for
the X/Y and Z-axis can be set within generous limits. The 4th
axis can be programmed as U, V, W, A, B or C or tangential axis.
• reference and limit switch interrogation, max. 10 inputs and 8
additional outputs can be set within generous limits on LPT1+2
• recognizes HPGL, DIN/ISO, MultiCAM 2D and 3D, drilling
formats, ISEL NCP, EPS and AI
- 9 -