User manual

WinPC-NC Economy Signal wizzard
Interactive signal testing
4. Click to the function Done and change again into the window of
the signal wizzard. Select now the corresponding input signal in
the lefthand window (e.g. I235 reference switch X) and open the
drop-down menu below in order to assign the pin number (e.g.
LPT1 Pin11).
Assignment of pin numbers to the input lines
5. With normally open contacts (color change from black to red)
always select the normal pin number. With normally closed
contacts (color change from red to black) select the inverted pin
number, e.g. LPT1 PIN11 Inv
.
6. After clicking the button Accept the selected pin number is
displayed in the assignment table.
7. Proceed in the same way with all other required input signals.
8. Save the paramater settings and if necessary, check once more all
assignments with the function special functions-signal test.
Herewith a pressed switch must always produce a red LED light,
i.e. a HIGH level.
- 94 -