User manual

67
11. General Commands
In the following examples, it is assumed that the PIN of the SIM card in the “GX107” is “1513”.
According to the PIN set by you, you have to replace the “1513” by your own PIN, of course.
11.1 Status Request
You have the option of checking the status of the “GX107” and the parameters. You will receive
a text message informing you of battery condition, GSM reception, out-/input status, voltage,
etc.
Command:
STATUS #1513
Answer:
GX107 1.XX Name, Version SW
- - - - - - - - - - - - - - -
Alarm: off Alarm mode on/off
GSM: 90% GSM signal strength
Rechargeable Battery: 50% Status of the rechargeable battery
Area: off Zone monitoring on/off
Voltage: 12.2V Voltage of the power supply,
less than 5 V means battery mode!
ADC: 0.02V Voltage at the analogue input or temperature
IN1: low Condition at input IN1 “low”/”high”
OUT1: off Output 1 on/off (relay)
OUT2: on Output 2 on/off (transistor)
INCALL: OUT1 0s INCALL connected to OUT1, 0=toggle