Installation Guide

HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Assembly - Attaching the blade brackets

Attaching the blade brackets

□ Fasten the blade bracket (G) to the motor (E) by inserting the

alignment post into the slot on the bottom of the fan-motor

assembly (E) and tightening the motor screws that are pre-

assembled to the blade bracket (G).

□ Repeat for the remaining four blade brackets (G).

Operation

Turn on the power and check the operation of the fan. The pull

chain controls the fan speeds as follows:

1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - off

The appropriate speed settings for warm or cool weather depends

on factors such as the room size, ceiling height, and number of

fans.

The slide switch (YY) controls the direction of the blades: forward

(switch down) or reverse (switch up)

Warm weather - (Forward) A downward airow creates a cooling ef-

fect. This allows you to set your air conditioner on a warmer setting

without affecting your comfort.

Cool weather - (Reverse) An upward airow moves warm air off of

the ceiling. This allows you to set your heating unit on a cooler set-

ting without affecting your comfort.

NOTE: Wait for the fan to stop before reversing the direction of

blade rotation.