Nozzle Literature

toro.com 800-803-8676
©2018 The Toro Company. All rights reserved. Rev 5/18
Multi Pro Spray Nozzle Selection Guide
80 mesh 100-6992
50 mesh 100-8642
(Standard Equipment)
30 mesh 100-6991
Color Nozzle Toro Spray Flow in Liters Per Hectare - 50 cm Spacing
Code Options Part# Pressure l/min 4 5 6 7 8 9 10 12 14
Bar km/h km/h km/h km/h km/h km/h km/h km/h km/h
AIC 120-0701 1.0 0.91 273 218 182 156 137 121 109 91.0 78.0
AI Turbo TwinJet** 120-0708 1.5 1.12 336 269 224 192 168 149 134 112 96.0
Red TurfJet** 95-9222 2.0 1.29 387 310 258 221 194 172 155 129 111
0.4 gpm* XRC 117-5834 3.0 1.58 474 379 316 271 237 211 190 158 135
4.0 1.82 546 437 364 312 273 243 218 182 156
Tip Strainer - 50 120-0699 5.0 2.04 612 490 408 350 306 272 245 204 175
AIC 120-0702 1.0 1.14 342 274 228 195 171 152 137 114 97.7
AI Turbo TwinJet** 120-0709 1.5 1.39 417 334 278 238 209 185 167 139 119
Brown TurfJet** 95-9223 2.0 1.61 483 386 322 276 242 215 193 161 138
0.5 gpm* XRC 117-5835 3.0 1.97 591 473 394 338 296 263 236 197 169
4.0 2.27 681 545 454 389 341 303 272 227 195
Tip Strainer - 50 120-0699 5.0 2.54 762 610 508 435 381 339 305 254 218
AIC 120-0703 1.0 1.37 411 329 274 235 206 183 164 137 117
AI Turbo TwinJet** 120-0710 1.5 1.68 504 403 336 288 252 224 202 168 144
Gray TurfJet** 95-9224 2.0 1.94 582 466 388 333 291 259 233 194 166
0.6 gpm* XRC 117-5836 3.0 2.37 711 569 474 406 356 316 284 237 203
4.0 2.74 822 658 548 470 411 365 329 274 235
Tip Strainer - 50 120-0699 5.0 3.06 918 734 612 525 459 408 367 306 262
AIC 120-0704 1.0 1.82 546 437 364 312 273 243 218 182 156
AI Turbo TwinJet 120-0711 1.5 2.23 669 535 446 382 335 297 268 223 191
White TurfJet** 95-9225 2.0 2.58 774 619 516 442 387 344 310 258 221
0.8 gpm* XRC 117-5837 3.0 3.16 948 758 632 542 474 421 379 316 271
4.0 3.65 1095 876 730 626 548 487 438 365 313
Tip Strainer - 50 120-0699 5.0 4.08 1224 979 816 699 612 544 490 408 350
AIC 120-0705 1.0 2.28 684 547 456 391 342 304 274 228 195
AI Turbo TwinJet 120-0712 1.5 2.79 837 670 558 478 419 372 335 279 239
Blue TurfJet** 95-9188 2.0 3.23 969 775 646 554 485 431 388 323 277
1.0 gpm* XRC 117-5838 3.0 3.95 1185 948 790 677 593 527 474 395 339
4.0 4.56 1368 1094 912 782 684 608 547 456 391
Tip Strainer - 50 120-0699 5.0 5.10 1530 1224 1020 874 765 680 612 510 437
AIC 120-0706 1.0 3.42 1026 821 684 586 513 456 410 342 293
AI Turbo TwinJet 120-0713 1.5 4.19 1257 1006 838 718 629 559 503 419 359
Green TurfJet** 95-9226 2.0 4.83 1449 1159 966 828 725 644 580 483 414
1.5 gpm* XRC 117-5839 3.0 5.92 1776 1421 1184 1015 888 789 710 592 507
4.0 6.84 2052 1642 1368 1173 1026 912 821 684 586
Tip Strainer - 50 120-0699 5.0 7.64 2292 1834 1528 1310 1146 1019 917 764 655
* Recommended Valve Cal setting in Pro Control/XP: 46 for nozzles 0.2 gpm and 0.4 gpm. Use 23 for 0.5 gpm and higher.
** TurfJet and TwinJet Air nozzles are not compatible with the Toro Drift Reduction Boom Shroud.Application rates shown for nozzle selection purposes only.
Verify actual rate before spraying. Speeds shown are for reference only. Always limit speed to maintain safe operation based on operating conditions.
TeeJet and TwinJet are registered trademarks of Spraying Systems Co.
4
SIMPLE STEPS
TO COMPLETE YOUR SPRAYER
CHOOSE SYSTEMIC
OR CONTACT NOZZLES
FIND THE NOZZLE THAT FITS
YOUR APPLICATION
• herbicides • fungicides • insecticides
• liquid fertilizer • drift
ORDER THE CORRECT CAPS,
GASKETS AND
TIP STRAINERS
SELECT THE DESIRED
MAIN SUCTION
LINE FILTER
• 80 mesh • 50 mesh • 30 mesh
1
2
3
Nozzle
Selection Guide
2
4
NOZZLE SELECTION GUIDE