Instructions

Temporis 16
10002288 Rev.0 (DE/EN)
20-16
Printed in China
1. Hook switch
2. Handset volume switch
3. Flash button
4. Out button
5. Ringer volume switch
6. Redial button
7. Up button
8. Down button
9. MENU button
10. Phonebook button
11. Delete button
12. Wall mounting hook
USER GUIDE
CONNECTING THE TELEPHONE
1. Plug the coiled cord into the jack on the handset.
2. Plug the long straight line cord into a modular wall telephone jack.
3. Set the RINGER switch on the base to HI.
+ = HI
= MID
- = LOW
WALLMOUNTING THE PHONE
1. Push the Wall mounting hook up (12) and
out with your thumb, turn it over, and
replace it in the slot on the base.
2. Drill the hole as draft.
3. Slip the mounting holes (on the bottom
of the base) over the wall plate posts and
firmly slide the unit down into place.
Setting date and time:
- MENU/ or to SET 1 DATE / MENU / or /MENU….
to enter Year, Month, Day, Hour and Minute / MENU.
Setting local area code:
- MENU/ or to SET 2 CODE / MENU / or /MENU….
to enter your area code / MENU.
Setting long distance code:
- MENU/ or to SET 3 PCODE / MENU / or
to enter your long distance code / MENU.
Setting Flash time to operate correctly on your network:
- MENU/ or SET 4 FLASH/ MENU / or
to select FLASH 90/ 110 / 300/600 or1000/ MENU.
Setting TONE or PULSE (In Idle Mode):
- Hold * button for 3 seconds to select Tone or Pulse mode.
Setting CONTRAST (In Idle Mode):
- Press R button until desire contrast level is reached.
MAKE A CALL
- Redial a number :
1. or
2. The last number called is automatically redialed.
- From call log list*:
1. or to select the caller number
- From direct memories :
1. or + ...
TELEPHONE KEYS (Fig.1)
Your phone should be placed on a level surface or you can mount it
on a wall.
* Subject to subscription and availability of the service from the
fixed line operator.
INSTALLING THE PHONE (Fig. 3)
- Delete a Caller ID number: or to select the number /
- Delete all Caller ID number: or to select Caller ID number
/ long press to delete all Caller ID number.
DELETE CALLER ID NUMBER (In Idle Mode)
or , to review caller number.
REVIEW CALLER ID NUMBER (In Idle Mode)
- Store a telephone number: 0…9 to input number / MENU / 0…9
to select memory location.
- Store an incoming call number: or to select the number
/ MENU / 0…9 to select memory location
- Store an outgoing number: to select the number /MENU / 0…9
to select memory location
REVIEW AND DIAL BACK
AN OUTGOING NUMBER
- Review an outgoing number (In Idle Mode): to select number
- Dial back an outgoing number (In Idle Mode): to select number
/
DELETE OUTGOING NUMBER
- Delete an outgoing number (In Idle Mode): to select number/
- Delete all outgoing number (In Idle Mode): to select number/
long press
STORE NUMBER (In Idle Mode)
13. Month
14. Day
15. Hour
16. Minutes
17. Voice mail*
18. New CID*
19. In-coming Call*
20. Call-log number*
21. Phone number display*
DISPLAY ICONS (Fig. 2)
T16
www.alcatel-home.com
Fig.1
Fig.2
Fig.3
100MM
GENERAL SETTINGS
(In Idle Mode)
13 14 15 16 1817 19 20
21
1
3
2
7
8
11
10
12
9
4
6
5
SAFETY
ENVIRONMENT
CONFORMITY
Donotuse your telephone tonotifya gasleak orother potential
explosion hazard. Do not open your device or its power supply
to avoid risk of electricalshock. Do not attempt to open the
batteries, as they contain hazardous chemical substances.
Your telephone must be located in a dry place away from hot,
humide and direct sunlight condition. To avoid radio signal
interference, placethephone at least 1 meter away from other
electrical appliances or other phones.
This symbol means that your inoperative electronic
appliance must be collected separately and not mixed
with the household waste. The European Union has
implemented a specific collection and recycling system
for which producers are responsible.
Help us protect the environment in which we live!
The logo printed on the products indicates the conformity with all
essential requirements and all applicable directives.
You can download the Declaration of Conformity from our website
www.alcatel-home.com
Alcatel is a trademark of Nokia, used under license by ATLINKS.