Use and Care Manual

Operator’s Manual
Chipper Shredders
11
Check for parts online at w ww.tazztools.com or call 800-345-6007 M-F 8-5
FIGURE 5 - Installing the Hopper Handle
A. M8-1.25 x 20 Hex Flange Bolt and Nut
B. M8-1.25 Hex Nut
C. M8 Washer
A
Install Debris Bag
1. Slide the support rod (A) into the bracket (B). SEE
FIGURE 6. Rotate the rod so that it sits below the front
tab (C) of the bracket. FIGURES 6 & 7
2. Slide the tabs (B) on the debris bag onto the support rod
(A). FIGURE 8
3. Secure the bag connector onto the chipper by rotating
the connector until locked in. SEE FIGURE 8
B
A
B
FIGURE 6
A. Rod
B. Bracket
C. Tab
C
FIGURE 7
FIGURE 8
A. Support Rod
B. Debris Bag Tabs
C. Connector Bag Rotation
B
A
C
C