Instructions / Assembly

ManualsBrandsUnbranded ManualsDog Carriers, Houses & KennelsLow Profile 5 ft. Outdoor Pet Gazebo Dog Kennel

Pet Gazebo Assembly Instructions

1. ASSEMBLE PET GAZEBO WALLS

• Begin with two wall panels. Place connectors on the bottom of both ends of one panel. Please note; all

connectors are identical.

• Insert the second panel into the connector. It is important to have the connector already attached to

the opposite side.

• Attach a connector to join the two panels at the top so the unit can stand freely.

• Repeat these steps until you have an octogonal shape, giving attention to the placement of the door

panel and the window panel.

Summary of content (5 pages)

PAGE 1
Pet Gazebo Assembly Instructions 1. ASSEMBLE PET GAZEBO WALLS • Begin with two wall panels. Place connectors on the bottom of both ends of one panel. Please note; all connectors are identical. • Insert the second panel into the connector. It is important to have the connector already attached to the opposite side. • Attach a connector to join the two panels at the top so the unit can stand freely.
PAGE 2
. Assemble Gazebo Roof Supports • Insert roof support arm into the the support hole in the connector. • Repeat step directly across the opposite side effectively splitting the octogon in half. • Insert roof support arms into the roof support cap. • Repeat above two steps. Note; its best to insert roof support arms as to make an “x” pattern first. • Once that is done, you may insert the rest of the roof support arms. 3. Attach Kennel Cover to Pet Gazebo. • • The kennel cover is reversable.
PAGE 3
Pet Gazebo Assembly Instructions • Screw the roof support topper to attach kennel cover to the kennel. • Using the ball bands provided attach kennel cover to the posts of the kennel. Note; align ribs of the kennel cover with the posts of the panels.
PAGE 4
PAGE 5
Connecting Multiple Pet Gazebos 1. Must have more than one Pet Gazebo. However, no EXTRA parts are needed. Only the ones included with each Pet Gazebo. Detach a single wall panel and its connectors, from a fully completed gazebo. 2. Re-attach all four connectors so that it turns the connecting wall panel outward rather than inward. To do this, simply rotate the connectors 180°. 3. Re-attach panel so it is facing outward. 4. Attach Gazebos together into the open connectors.