Instructions / Assembly
2. Assemble Gazebo Roof Supports
• Insert roof support arm into the the support hole in the connector.
• Repeat step directly across the opposite side effectively splitting the octogon in half.
• Insert roof support arms into the roof support cap.
• Repeat above two steps. Note; its best to insert roof support arms as to make an “x” pattern first.
• Once that is done, you may insert the rest of the roof support arms.
3. Attach Kennel Cover to Pet Gazebo.
• The kennel cover is reversable. The white side tends to reflect heat and sunlight and the brown side
tends to absorb it.
• Pick which side of the kennel cover you wish and then line up the center of the kennel cover over the
roof support cap.