Instructions / Assembly

Installation on Space Sheathing
Roof valleys (Con’t)
• Install shingles at top of valley at least 10 cm (4 in.) from each side of
centre line, increasing by 32 mm (1/8 in.) per 30 cm (1 ft) down the valley.
• Snap chalk lines down both sides of valley for guidelines.
• Follow same principles for shingling into a hip.
•
Use one shingle as a pattern for cutting the other shingles.
• Where a shingle course ends at a hip, cut each shingle individually.
• Use triangular pieces cut from shingles used in valleys to finish hip edges.
Courtesy of :