INSTALLATION GUIDE GUIDE D’INSTALLATION ABOVE TOILET CABINET MEUBLE AU DESSUS DE LA TOILETTE PLEASE NOTE THAT A FRENCH VERSION OF THE INSTRUCTIONS WILL FOLLOW THE ENGLISH VERSION VEUILLEZ NOTER QU'UNE VERSION FRANÇAISE DES INSTRUCTIONS SUIT LA VERSION ANGLAISE -1-
TO GET STARTED POUR COMMENCER This manual is a graphic reference for installation purposes. Some graphic elements and components may differ. Consult local building codes to ensure that installation complies with standards in your area. Ce manuel est une référence graphique pour l’installation. Certains éléments graphiques et composantes peuvent différer. Consultez le code du bâtiment de votre région, afin que l’installation respecte les normes en vigueur.
PARTS LIST 1 9 9 3 2 5 4 6 16 15 7 10 11 8 11 13 12 14 0:30 -3-
PARTS LIST A B Ф6x35mm C Ф15x10mm 18PCS F E Ф8x30mm 18PCS G D 4PCS H Ф3x10mm I 4PCS 18PCS J Ф4x25mm 4PCS K 1PC L 2PCS M Ф4*10mm 2PCS P N 2PCS O Ф4x30mm 2PCS Q 2PCS Ф4x35mm 2PCS R 1PC S LOCK NUT 4PCS T Ф4x60mm 1PC 4PCS 4PCS U Ф3x12mm 2PCS -4- 4PCS 2PCS
ASSEMBLY STEPS 1- Start by inserting 2 wood dowels (C) into wood dowel holes of stand (13) 12 2- Insert 2 bolt lock nuts (S) into their designated holes on cross bars (11) & (11). 3- Attach stand (13) to cross bars (11) & (11) by inserting 2 Allen head bolts (R) into their designated holes on stand (13) and tightening them to cross bars (11) & (11). Make sure that the bolts (R) screw into the threads of the bolt lock nuts (S) inside the lock nut holes.
ASSEMBLY STEPS STEP 3 1- Attach side board (2) to board (4) by inserting the cam bolts (A) into the cam lock holes on board (2) 2- Insert 3 cam locks (B) into the cam lock holes in side board (2) then rotate cam lock clockwise to secure cam bolt (A) in place 3- Repeat the steps above to attach side board (3) to board (5) as shown below. 4- Screw 2 cam bolts (A) into the pre-threaded holes of each of the boards (2) & (3).
ASSEMBLY STEPS STEP 5 1- Slide white board (10) into the grooves of boards (2), (3), & (7) as shown in the figure below.
ASSEMBLY STEPS STEP 6 3 1- Attach cabinet assembly to base stand assembly by inserting the cam bolts (A) of the cabinet into the cam bolt holes of the stands (12) & (13). 2- Insert 4 cam locks (B) into the cam lock holes on the interior sides of the stands (12) & (13) then rotate cam locks (B) clockwise to secure cam bolt (A) in place.
ASSEMBLY STEPS STEP 7 1- Place back-wall strip (N) in between back walls (9) & ( 9 ) to hold them together, then slide them together into the back side of the cabinet assembly. BOAR D (1) 2- Screw 4 cam bolts (A) into the pre-threaded holes of upper board (1). Do not over tighten. 3- Attach 2 wall brackets (K) to the upper board (1) at the location shown in the figure on the right using 2 pan head screws (L).
ASSEMBLY STEPS STEP 8 1- Place 4 shelf holders (F) into their designated holes at the interior of side panels (2) & (3) at the desired shelf level. 6 2- Make sure that the shelf holders (F) are inserted in the position shown in the figure to the right. 3- Place shelf (5) on the top of the shelf holders (F) as shown in the figure to the right. F x4PCS STEP 9 1- Attach metallic strip (H) to the interior face of door (15) as shown in the figure on the right using a flat head screw (E).
ASSEMBLY STEPS STEP 10 1- Place the cabinet at the desired location backed by a wall. Then, with a pencil, mark the location of the wall bracket holes on the surface of the wall. 2- Drill holes in the wall at the two marked locations and insert 2 plastic wall anchors (T) into the drilled holes. 3- Fix the cabinet to the wall by inserting 2 pan head screws (O) through the wall brackets (K) (previously installed), then tighten the screws (O) into the plastic wall anchors (T).
FRENCH VERSION FOLLOWS : LA VERSION FRANÇAISE SUIT : - 12-
LISTE DE PIÈCES 1 9 9 3 2 5 4 6 16 15 7 10 11 8 11 13 12 14 0:30 - 13 -
LISTE DE PIÈCES A B Ф6x35mm C Ф15x10mm 18PCS E Ф8x30mm 18PCS G F D 4PCS H Ф3x10mm I 4PCS 18PCS J Ф4x25mm 4PCS K 1PC L 2PCS M À Ф4*10mm 2PCS P N À O Ф4x35mm 2PCS R À 2PCS Ф4x30mm 2PCS Q 2PCS 1PC S 4PCS T Ф4x60mm 1PC 4PCS 4PCS U Ф3x12mm 2PCS - 14 - 4PCS 2PCS
ÉTAPES D'ASSEMBLAGE Étape 1 1ence pa n an le app p 2- n 12 11 pp n e 13 e e l n an le le a e an e ale 11 e 3- e le pp a e an e ale 13 a l n e 11 e 11 en n an 2 he a nale an le app p le pp a e 13 e en le e an a an e ale 11 e 11 ee le l n n en an le le e e e e l n ee le n en n n an le app p le a e an e ale 11 e 11 11 13 e 2 e n e 2 11 - p e le ape c - e p 12 l a e c pp e a e an e ale 11 e 11 x 4PCS x 4PCS e le x 4PCS Étape 2 1n e 3 l n ca e an le p - le e la pla e c e e e pa p e e 2e 2 ch
ÉTAPES D'ASSEMBLAGE Étape 3 1- Fixez le panneau latéral (2) à la plaque (4) en insérant les boulons à came (A) dans les trous appropriés sur le panneau (2). 2- Insérez 3 verrous à came (B) dans les trous du panneau latéral (2), puis tournez le verrou dans le sens des aiguilles d'une montre pour fixer le boulon à came (A) en place. 3- Répétez les étapes ci-dessus pour fixer le panneau latéral (3) à la plaque (5) comme indiqué ci-dessous.
ÉTAPES D'ASSEMBLAGE Étape 5 1- a e e e a ea a c 10 a e a ec- e 2e à came a e 3- e a a e e a m e à e em e e a a ae e am e e e e e a ec- e e e a ea 2 3 e c mme e e a ae e am e e a m ee a à e a a a à e em e e a m e c mme 8 3 2 10 0 A x 4PCS M x4PCS - 17 - 8 a e a e e a
ÉTAPES D'ASSEMBLAGE Étape 6 - e a m ea e am e a e 13 cee a 2- e e à came a e e 12 e 13 a e e e a e em e ace came a e e e e 3 à came 12 e a e -e e e à e 2 à 11 13 12 B x 4PCS - 18 -
ÉTAPES D'ASSEMBLAGE Étape 7 1- Placez la bande arrière (N) entre les planches arrières (9) et ( 9 ) pour les maintenir ensemble, puis faites-les glisser ensemble dans la partie arrière de l’armoire. PLA ) UE (1 2- issez 4 boulons à came (A) dans les trous pré-filetés de la planche supérieure (1). Ne pas trop serrer. 3- Fixez 2 supports muraux (K) sur la plaque supérieure (1) à l emplacement indiqué sur la figure de droite à l aide de 2 vis à tête pan (L).
ÉTAPES D'ASSEMBLAGE Étape 8 1- lacez 4 supports d étagères (F) dans les trous appropriés à l intérieur des panneaux latéraux (2) et (3) au niveau souhaité. 2- ssurez-vous que les porte-étagères (F) sont insérés dans la position indiquée sur l'illustration à droite. 3- lacez l étagère (5) sur le dessus des supports d étagères (F) comme indiqué sur la figure à droite.
ÉTAPES D'ASSEMBLAGE Étape 10 1- Placez l'armoire à l'emplacement souhaité adossée à un mur. Puis, avec un crayon, marquez l’emplacement des trous du support mural sur la surface du mur. 2- Percez des trous dans le mur aux deux emplacements marqués et insérez 2 ancrages muraux en plastique (T) dans les trous percés. 3- Fixez le meuble au mur en insérant 2 vis à tête pan (O) dans les supports muraux (K) (précédemment installés), puis serrez les vis (O) dans les ancrages muraux en plastique (T).
ENTRETIEN MAINTENANCE Caution Attention Les détergents en poudre ou liquides abrasifs peuvent endommager les surfaces. Powdered detergents and abrasive liquid cleaners may damage surfaces. Ne mettez jamais en contact la surface avec des produits corrosifs contenant de l’acétone (nettoyant de vernis à ongles), des solvants, des décapants, de l’essence, etc.
GARANTIE WARRANTY A&E Shower & Bath inc. (˝A&E˝) offre la garantie limitée suivante sur ses produits. Cette garantie s’applique uniquement au propriétaire original pour une utilisation domestique. A&E garantit ses produits contre tout défaut de matériau ou de fabrication pour des conditions normales d’utilisation et d’entretien pour une période d’une (1) année à compter de la date d’achat originale du produit par le propriétaire.