Instructions / Assembly

External Swivel Used for
Step Degree Angles
a) Adjust external swivel to desired angle and install set screw.
b) Cut ADA tube with aluminum to desired length.
c) Insert external swivel bracket into the ADA tube.
d) Pre drill aluminum reinforced ADA tube and bracket with drill bit
and install self tapping screw provided.
P-Loop Return is Used at the Bottom of
Steps or Handicap Ramps
a) Attach top bracket at desired location using appropriate
connectors.
b) Cut P-Loop to desired length.
c) Connect P-Loop to ADA tube using the appropriate joiners
(Straight, Adjustable joiners or External swivel).
d) Set P-Loop on top of bracket and pre drill with drill bit
and install self tapping screw provided.
e) Install desired lower bracket.
External Swivel - 0 to 60°
P-Loop Return
Typical ADA Railing Installation
Components:
ADA Handrail
w/Aluminum Insert
6” Straight Joiner
4” Inside/Outside
Corner
Straight End Wall
Bracket
Inside Corner
Bracket
End Cap
P-Loop Return
6” Adjustable Joiner
90° Quick Return
Bracket
External Swivel
Stand Off Bracket
5°, 32°, or 38°
Radius Bend
1
1
1
1
2
3
3
3
4
4
5
5
6
7
7
8
8
9
9
10
10
11
12
11
11
or
12
or
8
10
or
12
or
Optional Beauty Ring
Joint Cover
(Use As Necessary)
ADAinstall314_ADA 4/23/14 2:39 PM Page 1