Installation Guide



96” ÷ 5” = 19.2 rows or 18 Rows of 5”
1 Row of 3”
1 Row of 3”
+
+
Step 3
Measure the distance between your floor and ceiling. Take this distance and divide it by the width of
your Timberchic® plank.
Example: If your floor to ceiling distance is 96” and your Timberchic® plank width
is 5”, 96 ÷ 5 = 19.2 That means you will have 19.2 rows of planks, or 19 full rows of 5”
and 1 row of .2 of 5”, which is 1” (5” x .2 = 1”)
Step 4
Determine the width of your starting and finishing row.
Example: A 1” row is too narrow and not optimal for finishing a room. Ideally we
would like to have a row no less than 1/2 the width of a nominal row. Another way of
expressing 19 rows of 5” and 1 row of 1” is 18 rows of 5” with 6” leftover (5” + 1” = 6”).
Divide 6” in half and that is the width of the starting and finishing rows. Start with a 3”
row along the ceiling, 18 full rows in the middle and finish with a 3” row along the floor.