Warranty

GB
9
8
Door reversibility
1
2
4
3
This allows you to change the direction in which the door opens. Follow the instructions below (example
for changing a right-hand door into a left-hand door):
5 Unscrew the door pin.
6 Carefully remove the cap using a thin
blade and assemble the pin in its place.
Reposition the cap on the opposite side.
1 Unscrew the three screws using a "T25"
Torx wrench.
2 Remove the upper hinge.
3 Carefully remove the caps using a thin
blade.
4 Remove the cabinet door by opening it
slightly, then lifting it upwards.
A Upper hinge
B Caps
C Caps
D Torx screw
E Hex screw
F Door catch
G Lower hinge
H Door pin
J Door pin cap
x3 x4x3
C E
x3
DB GF H JA
x2
9 Turn the door through 180°.
Warning: the door is very heavy.
Take any necessary precautions
to ensure that you do not injure
yourself or drop it.
10 Put the door back on its pin.
12
11
13
11 Put in place the upper hinge.
12 Screw the hinge so that the door is
completely parallel to the cabinet.
Check that the door seal adheres well
to the cabinet (by closing the door),
to ensure that it is completely air-tight.
13 Put in place the caps.
7 Unscrew the two screws and the door
catch.
Unscrew the two screws on the
opposite side and remove the two
washers.
7
8
8 Mount the door catch on the desired
opening side, using screws.
Replace the washers, then the screws,
on the side opposite the door catch.