Instructions / Assembly

Stainless Steel Water Heater Water Connectors

 INSTALLATION/MAINTENANCE: Improper installation can cause failure, leaks, floods, and

property damage. Always follow building codes and construction standards.

 Shut off water, gas, and electricity to appliance before installing. Select proper length for Job

 DO NOT install with twists, kinks, sharp angles, or loops in line, which can damage line internally.

 Inspect product before installing. Do not use if damaged in any way.

 HAND-TIGHTEN, plus 1/4 turn with wrench. Do not overtighten. Overtightening can damage

line, connectors, and seals.

 This part must be inspected after installation and every six months thereafter (more frequently

if you have “hard water”). Shut water off immediately and replace if signs of damage, cracks,

kinks, twist, corrosion, wear, breaks, leaks, or weeping. DO NOT reuse

PAGE 1
Stainless Steel Water Heater Water Connectors       INSTALLATION/MAINTENANCE: Improper installation can cause failure, leaks, floods, and property damage. Always follow building codes and construction standards. Shut off water, gas, and electricity to appliance before installing. Select proper length for Job DO NOT install with twists, kinks, sharp angles, or loops in line, which can damage line internally. Inspect product before installing. Do not use if damaged in any way.