Installation Guide

HOMEDEPOT.COM
Please contact 1-855-556-1852 for further assistance.
Safety Information
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Battery Safe Handling:
□ Do Not Mix Old And New Batteries.
□ Do Not Mix Alkaline, Standard (Carbon – Zinc), or Rechargeable (Nickel – Cadmium) Batteries.
□ Battery must be recycled or disposed of properly.
□ Keep battery away from children. If swallowed, promptly see a doctor. Do not open battery, dispose of
in fire, put in backwards, or short circuit—it may ignite, explode, leak or get hot causing injury.
Specifications
216593
Doorbell Type Wireless
Number of Push Buttons 1
Included Hardware (2) #4 x ¾ in. Screws and (1) 18x31mm Adhesive Sticker
Finished Product Dimensions 2.518 in. Height x 1.268 in. Width x .79 in. Depth
Power Source CR2032 Battery (included)
Finish Color Black
Lighted Button Yes
216594
Doorbell Type Wireless
Number of Push Buttons 1
Included Hardware (2) #4 x ¾ in. Screws and (1) 18x31mm Adhesive Sticker
Finished Product Dimensions 2.518 in. Height x 1.268 in. Width x .79 in. Depth
Power Source CR2032 Battery (included)
Finish Color Brass
Lighted Button Yes
216595
Doorbell Type Wireless
Number of Push Buttons 1
Included Hardware (2) #4 x ¾ in. Screws and (1) 18x31mm Adhesive Sticker
Finished Product Dimensions 2.518 in. Height x 1.268 in. Width x .79 in. Depth
Power Source CR2032 Battery (included)
Finish Color White
Lighted Button Yes
Troubleshooting
Problem Possible Cause Solution
Chime does not sound when push button is pressed. Push button battery has not been
activated.
Confirm the activation tab has been removed and
the battery is seated properly in the button.
The chime and push button are out
of transmission range.
Move the chime closer to the push button
location. Ensure there are no metallic objects or
concrete walls hindering the signal.
Push button battery needs to be
replaced.
Replace the push button battery with a CR2032
Lithium Coin battery.
Chime is sounding without the push button being pushed. An outside signal is interfering with
the signal between the chime and
push button.
Resync the chime and push button following the
steps in the instructions.
WARNING: Keep batteries out of reach of
children.