Instructions / Assembly

HOMEDEPOT.COM
Please contact 1-855-556-1852 for further assistance.
4
MOUNTING THE PUSH BUTTON
□ Remove the front cover from the base by following step 1.
□ Mount the push button base to a clean wall or door jamb
with included screws or mounting tape. If mounting with
screws, predrill a pilot hole through the push button base in
the desired location using a 5/64 in. drill bit.
□ Snap the push button cover onto the base by first hooking
the tops together, then snapping the base on.
216604-216605Inst.ai
Learning
mode
button
5
RESYNCING THE CHIME AND PUSH BUTTON
This step is optional only if restarting and resyncing the chime
is needed.
□ Press and hold the learning mode button on the chime until
you hear a ding sound. The chime is now reset and ready to
be resynced.
□ Follow step 3 to sync the chime and push button.
Safety Information
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Battery Safe Handling:
□ Do Not Mix Old And New Batteries.
□ Do Not Mix Alkaline, Standard (Carbon – Zinc), or Rechargeable (Nickel – Cadmium) Batteries.
□ Battery must be recycled or disposed of properly.
□ Keep battery away from children. If swallowed, promptly see a doctor. Do not open battery, dispose of
in fire, put in backwards, or short circuit—it may ignite, explode, leak or get hot causing injury.
Specifications
216604
Doorbell Type Wireless
Number of Push Buttons 2
Included Hardware (2) #4 x ¾ in. Screws and (2) 18x31mm Adhesive Stickers
Finished Product Dimensions 4.38 in. Height x 4.38 in. Width x 1.25 in. Depth
Transmission Range 100 feet
Number of Sounds 2
Chime Power Source Plug-In
Push Button Power Source CR2032 Battery (included)
216605
Doorbell Type Wireless
Number of Push Buttons 1
Included Hardware (2) #4 x ¾ in. Screws and (1) 18x31mm Adhesive Sticker
Finished Product Dimensions 4.38 in. Height x 4.38 in. Width x 1.25 in. Depth
Transmission Range 100 feet
Number of Sounds 2
Chime Power Source Plug-In
Push Button Power Source CR2032 Battery (included)
WARNING: Keep batteries out of reach of
children.