SDS

Material Name: OATEY PVC RAIN-R-SHINE BLUE CEMENT
____________________________________________________________
Page 3 of 11
Issue Date 09/07/12 Revision 2.0000
Print Date: 9/27/2012
First Aid: Skin
Remove contaminated clothing immediately. Wash all exposed areas with soap and water. Get medical attention
if irritation develops. Remove dried cement with hand cleaner or baby oil.
First Aid: Ingestion
DO NOT INDUCE VOMITING. Rinse mouth with water. Never give anything by mouth to a person who is
unconscious or drowsy. Get immediate medical attention by calling a Poison Control Center, or hospital
emergency room. If medical advice cannot be obtained, then take the person and product to the nearest medical
emergency treatment center or hospital.
First Aid: Inhalation
If symptoms of exposure develop, remove to fresh air. If breathing becomes difficult, administer oxygen.
Administer artificial respiration if breathing has stopped. Seek immediate medical attention.
* * * Section 5 - Fire Fighting Measures * * *
General Fire Hazards
See Section 9 for Flammability Properties.
Highly flammable liquid and vapor. Keep away from heat and all sources of ignition including sparks, flames,
lighted cigarettes and pilot lights. Containers may rupture or explode in the heat of a fire. Vapors are heavier than
air and may travel to a remote ignition source and flash back. This product contains tetrahydrofuran that may form
explosive organic peroxide when exposed to air or light or with age.
Hazardous Combustion Products
Combustion will produce toxic and irritating vapors including carbon monoxide, carbon dioxide and hydrogen
chloride.
Extinguishing Media
Use dry chemical, CO2, or foam to extinguish fire. Cool fire exposed container with water. Water may be
ineffective as an extinguishing agent.
Unsuitable Extinguishing Media
None.
Fire Fighting Equipment/Instructions
Firefighters should wear positive pressure self-contained breathing apparatus and full protective clothing for fires
in areas where chemicals are used or stored.
* * * Section 6 - Accidental Release Measures * * *
Recovery and Neutralization
Stop leak if it can be done without risk.
Materials and Methods for Clean-Up
Remove all sources of ignition and ventilate area. Soak up spill with an inert absorbent such as sand, earth or
other non-combusting material. Put absorbent material in covered, labeled metal containers.
Emergency Measures
Isolate area. Keep unnecessary personnel away.
Personal Precautions and Protective Equipment
Personnel cleaning up the spill should wear appropriate personal protective equipment, including respirators if
vapor concentrations are high.
Environmental Precautions
Prevent liquid from entering watercourses, sewers and natural waterways.
Prevention of Secondary Hazards
None