ASSEMBLY INSTRUCTION 15”W Shelf Cube MODEL # A3273 Adult Assembly is Required. Before proceeding with the assembly,please read the instructions carefully.Unpack all the components and place them on a smooth surface to avoid scratching or damaging your new furniture.Identify all the parts and components by comparing them with the Assembly Instruction,Please contact FOREMOST® Customer Service via e-mail:customerservice@foremostgroups.com or call 1-800-443-1410 for parts.
WARRANTY Each cube manufactured by Foremost Groups Inc. is covered by a one (1) Year Limited Warranty. We warrant our products to be free from defects in material or workmanship for a period one (1) year from the date of original purchase. Failure caused by unreasonable or abusive use.
1.Insert wood dowels (F) into the pre-drilled holes on both ends of fixed shelf (E) and side panels(B),then attach the fixed shelf (E) to the side panels (B).See illustration(1). (1) (2) 2.Attach the fixed panel (E) and the side panels (B) to bottom panel (C) with wood screws (G).Make sure it is tighten securely. See illustration (2). ' (3) 3.Insert back panel (D) by sliding it though the grooves on the side panels (B).Make sure to insert it all the way down, till it reaches the bottom panel (C).
6.Customers may connect the cubes in the following three ways (see illustration (6): Option 1:Attach brackets (I) to the back of the hollow core cube with screws (J) to connect it to other cubes and stabilize them. Option 2:Remove the four caps (H) on the surface of the lower cube and make sure the wood screws are tightened securely.Put four wood dowels (K) in the pre-drilled holes and then put another cube on the lower one as the picture indicated.
ASSEMBLY INSTRUCTION 15”W 2-Drawer Cube MODEL # A3274 Adult Assembly is Required. Before proceeding with the assembly,please read the instructions carefully.Unpack all the components and place them on a smooth surface to avoid scratching or damaging your new furniture.Identify all the parts and components by comparing them with the Assembly Instruction,Please contact FOREMOST® Customer Service via e-mail:customerservice@foremostgroups.com or call 1-800-443-1410 for parts.
WARRANTY Each cube manufactured by Foremost Groups Inc. is covered by a one (1) Year Limited Warranty. We warrant our products to be free from defects in material or workmanship for a period one (1) year from the date of original purchase. Failure caused by unreasonable or abusive use.
1. Insert wood dowels (L) into the pre-drilled holes on side panels (B)。Attach 4 slides(P) on the inside of side panels (B) with ball endings facing front. Attach the two side panels (B) to bottom panel (C) with wood screws (N). Make sure it is thighten securely. .See illustration(1). (2) 2.insert back panel(D) by sliding it through the grooves on the side panels (B). Make sure to insert it all the way down till it reaches bottom panel (C).. See illustration (2). 3.Attach top panel(A) with wood screws (N).
6.Customers may connect the cubes in the following three ways (see illustration (6): Option 1:Attach brackets (1) to the back of the hollow core cube with screws (J) to connect it to other cubes and stabilize them. Option 2:Remove the four caps (H) on the surface of the lower cube and make sure the wood screws are tightened securely.Put four wood dowels (K) in the pre-drilled holes and then put another cube on the lower one as the picture indicated.
ASSEMBLY INSTRUCTION 15”W Door Cube MODEL # A3275 Adult Assembly is Required. Before proceeding with the assembly,please read the instructions carefully.Unpack all the components and place them on a smooth surface to avoid scratching or damaging your new furniture.Identify all the parts and components by comparing them with the Assembly Instruction,Please contact FOREMOST® Customer Service via e-mail:customerservice@foremostgroups.com or call 1-800-443-1410 for parts.
WARRANTY Each cube manufactured by Foremost Groups Inc. is covered by a one (1) Year Limited Warranty. We warrant our products to be free from defects in material or workmanship for a period one (1) year from the date of original purchase. Failure caused by unreasonable or abusive use.
1.Insert wood dowels (F) into the pre-drilled holes on both end of side panels (B) and attach side panels (B) to bottom panel (C)。Insert wood screws (G) in to the bottom panel (C) to connect it to the side panels (B). Make sure it is tighten securely..See illustration(1). (1) (2) 2.Insert back panel(D) by sliding it trough the grooves on side panels (B), Make sure to insert it all the way down, till it reaches the bottom panel (C). . See illustration (2). (3) 3.
6.Customers may connect the cubes in the following three ways (see illustration (6): Option 1:Attach brackets (M) to the back of the hollow core cube with screws (N) to connect it to other cubes and stabilize them. Option 2:Remove the four caps (H) on the surface of the lower cube and make sure the wood screws are tightened securely.Put four wood dowels (O) in the pre-drilled holes and then put another cube on the lower one as the picture indicated.
ASSEMBLY INSTRUCTION 15”W Open Cube MODEL # A3276 Adult Assembly is Required. Before proceeding with the assembly,please read the instructions carefully.Unpack all the components and place them on a smooth surface to avoid scratching or damaging your new furniture.Identify all the parts and components by comparing them with the Assembly Instruction,Please contact FOREMOST® Customer Service via e-mail:customerservice@foremostgroups.com or call 1-800-443-1410 for parts.
WARRANTY Each cube manufactured by Foremost Groups Inc. is covered by a one (1) Year Limited Warranty. We warrant our products to be free from defects in material or workmanship for a period one (1) year from the date of original purchase. Failure caused by unreasonable or abusive use.
1.Insert wood dowels (E) into the pre-drilled holes on both end of side panels (B) and attach side panels (B) to bottom panel (C)。Insert wood screws (F) in to the bottom panel (C) to connect it to the side panels (B). Make sure it is tighten securely. (1) (2) 2.Insert back panel (D) by sliding it trough the grooves on side panels (B), Make sure to insert it all the way down, till it reaches the bottom panel (C). (3) 3.Attach top panel (A) with wood screws (F). 4.Attach caps (G) to top panel (A).
6.Customers may connect the cubes in the following three ways (see illustration (6): Option 1:Attach brackets (H) to the back of the hollow core cube with screws (I) to connect it to other cubes and stabilize them. Option 2:Remove the four caps (G) on the surface of the lower cube and make sure the wood screws are tightened securely.Put four wood dowels (K) in the pre-drilled holes and then put another cube on the lower one as the picture indicated.
ASSEMBLY INSTRUCTION 30”W large Divided Cube MODEL # A3278 Adult Assembly is Required. Before proceeding with the assembly,please read the instructions carefully.Unpack all the components and place them on a smooth surface to avoid scratching or damaging your new furniture.Identify all the parts and components by comparing them with the Assembly Instruction,Please contact FOREMOST® Customer Service via e-mail:customerservice@foremostgroups.com or call 1-800-443-1410 for parts.
WARRANTY Each cube manufactured by Foremost Groups Inc. is covered by a one (1) Year Limited Warranty. We warrant our products to be free from defects in material or workmanship for a period one (1) year from the date of original purchase. Failure caused by unreasonable or abusive use.
1.Insert wood dowels (F) into the pre-drilled holes on both end of side panels (B) and fixed panel (E). Attach side panels (B) and fixed panel (E) to bottom panel (C)。Insert wood screws (G) in to the bottom panel (C) to connect it to the side panels (B) and the fixed panel (E). Make sure it is tighten securely.See illustration (1). (1) (2) 2.Insert back panel (D) by sliding it trough the grooves on side panels (B), Make sure to insert it all the way down, till it reaches the bottom panel (C).
Option 1:Attach brackets (I) to the back of the hollow core cube with screws (J) to connect it to other cubes and stabilize them. Option 2:Remove the four caps (H) on the surface of the lower cube and make sure the wood screws are tightened securely.Put four wood dowels (K) in the pre-drilled holes and then put another cube on the lower one as the picture indicated. Option 3:Customers could connect the cubes by applying the above two ways at the same time. (6).