Specification

Dia
®
Location:
Specification
Tub/shower/hand shower system powered by the
Temptrol
®
Pressure Balancing valve includes adjustable
stop screw to limit handle turn, lever handles, adjustable
slide mechanism, diverter for toggling between xtures,
exposed shower column/slide bar, 7" diverter tub spout,
hand shower bracket, 60" exible metal hose with single
check valve, 1 mode hand shower with single check
valve, 1 mode showerhead and 2.5 gpm (9.5 L/min)
ow restrictors. Components made from metal and
nonmetallic construction, plated in standard polished
chrome nish.
Modifications
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Model Numbers
Note: Append appropriate -sufx to model number.
☐
-1.5
1.5 gpm (5.7 L/min) ow restrictor
☐
-2.0
2.0 gpm (7.6 L/min) ow restrictor
☐
- 352SH-3
Dia
®
3" diameter, 3 mode showerhead
☐
-361SH
Duro
®
4" square, 1 mode showerhead
☐
- 361SH-6
Duro
®
6" square, 1 mode showerhead
☐
-362SH
Duro
®
3" diameter, 1 mode showerhead
☐
- 4-161
Symmons
®
9" diameter rain showerhead
☐
- 4-166
Lucetta
®
6" diameter rain showerhead
☐
- 402SH1
Symmons
®
12" diameter rain showerhead
☐
- 402SH2
Degas
®
7-1/2" diameter, 3 mode showerhead
☐
- 422SH
Oxford
®
6-1/2" square, 1 mode showerhead
☐
- 432SH
Sereno
®
7-1/2" diameter, 1 mode showerhead
☐
- 512SH
Winslet
®
5-3/4" diameter, 1 mode showerhead
☐
- 532SH
Museo
®
5-3/4" diameter, 1 mode showerhead
-72
72" hose in place of 60" hose
☐
-ADACHS
ADA hand shower wand (chrome)
☐
-ADAHS
ADA hand shower wand (white)
☐
Delete
Suffix B
Chrome plastic escutcheon on valve with color
graphics/indicators in place of standard brass
☐
-IPS
1/2" female IPS connections
☐
-LP
Loop handle
☐
-LR
Lever handle
☐
-L/HD
Less showerhead
☐
-L/HS
Less hand shower
☐
-QD
Quick-disconnect on hand spray units
☐
-R
72" white vinyl hose in place of 60" metal hose
☐
-REV
Reverse coring, hot on right, cold on left, for
back to back installations
☐
-SS
Slip spout on any tub/shower unit
☐
- T2
Alternative 361DTS, square diverter tub spout
☐
-VB
Elevated vacuum breaker
☐
-VP
Vandal resistant escutcheon screws in place of
standard screws
☐
-X
Integral service stops - allows water shutoff at
valve for service
☐
-X-CHKS
Integral check stops - for use in installations
where a positive shut-off device is used
downstream of mixing valve
Compliance
-ASME A112.18.1/CSA B125.1

3502-CYL-B-EX
Dia tub/shower/hand shower system

3502-CYL-B-EX-TRM
Dia tub/shower/hand shower, trim only

46-2-BODY
Temptrol Pressure Balancing tub/shower valve body

46-2X-BODY
Temptrol Pressure Balancing tub/shower valve body
with stops
3502-CYL-B-EX
Tub/Shower/Hand Shower System
Specification Submittal
Finish Options

-STN
Satin Nickel finish
CG