Installation Guide

ManualsBrandsUnbranded ManualsPlumbingDuro 18 in. Shower Riser with Diverter in Chrome

Duro

Model Numbers Speciﬁcation

Modiﬁcations

Exposed Shower Riser includes lever handles, adjustable

slide mechanism and diverter for toggling between

xtures, exposed shower column/slide bar, 60" exible

metal hose with single check valve and hand shower

bracket. Components made from metal and nonmetallic

materials plated in standard polished chrome nish.

36EX

Exposed Shower Riser

Note: Append appropriate -sufx to model number.

Compliance

-ASME A112.18.1/CSA B125.1

Warranty

Limited Lifetime - to the original end purchaser in

consumer/residential installations.

5 Years - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.



-STN Satin Nickel ﬁnish

Measurements

Male 1/2" NPT thread must

protrude 1/2" (13 mm)

from nished wall

B 1/2"-14 NPT

C 27-1/2", 699 mm

D 22", 559 mm

For Shower Systems:

Min. 29", 737 mm from centerline

of shower output to valve

For Tub/Shower Systems:

Min. 29", 737 mm from centerline

of shower output to valve

F Ref. 77", 1956 mm

G 2-3/16", 55 mm

H 5-1/16", 128 mm

I 17-15/16", 456 mm

For Shower Systems:

Min. 42", 1067 mm

Max. 48", 1219 mm

For Tub/Shower Systems:

Ref. 32", 813 mm

Sq.

1-15/16", 49 mm

L 4", 102 mm

M Ø 13/16", 21 mm

Sq.

2-3/16", 56 mm

Hole Size

Ø 5/16", 8 mm

FLOORFLOOR

VALVE BODY SHOWN

AS REFERENCE ONLY

VALVE BODY SHOWN

AS REFERENCE ONLY

Dimensions

Exposed Shower Riser

Operation & Maintenance Manual

36EX

Notes: Dimensions subject to change without notice.

Important:

If the distance for item E

is less than 29" (737 mm),

Exposed Shower Riser is

not appropriate for your

application.

Summary of content (4 pages)

PAGE 1
Duro ® 36EX Exposed Shower Riser Operation & Maintenance Manual Model Numbers Specification Exposed Shower Riser includes lever handles, adjustable slide mechanism and diverter for toggling between fixtures, exposed shower column/slide bar, 60" flexible metal hose with single check valve and hand shower bracket. Components made from metal and nonmetallic materials plated in standard polished chrome finish.
PAGE 2
Parts Breakdown B A Item U C D E F Replacement Parts Description Part Number F Slide Mechanism RTS-043* G H I J K L M Q S T 60" Hose Lever Handle Set Screw Handle Hub Cartridge Screw Broach Diverter Cartridge Mounting Screw Toggle Anchor Anchor Tool RTS-045* RTS-041* RTS-042 RA-017 Note: Append -STN to part number for Satin Nickel finish. G Tools Required for Installation R P S Adjustable Wrench Q Allen Wrench: Handle (3 mm) Riser Flanges (2.
PAGE 3
Installation 1) Measure and mark hole spacing according to dimensions provided on page 1. Drill 5/16" (8 mm) hole in wall for mounting hardware. 2) Insert toggle anchor (S) into 5/16" hole. Locate mounting ring (R) over toggle anchor (S) and secure to wall with mounting screw (Q). 3) Install water connector (C) to pipe fitting. Slide flange cover (B) onto water connector so it sits flush with finished wall.
PAGE 4
Maintenance (cartridge replacement) 1) Using soft jaw pliers, remove lever handle (H). Remove handle set screw (I) and handle hub (J) from diverter body (N). 2) Remove cartridge screw (K) and broach (L) from cartridge (M). Remove cartridge (M) from diverter body (N). N H M N L 2 K 2 N 3 1 I 3) Apply removable thread lock to the threading of replacement cartridge. Install replacement cartridge into diverter body (N) at 50 in•lb.