Installation Guide

7
Seven Easy Steps to Installing Wall Hoods
Step one: Find the center of the wall
where you are installing the hood.
Make sure there is sufficient bracing
to hold the weight of the hood. Mark
your center line and measure out
from center to find your two mounting
points. Make sure your mounting
points are level when you mark them.
It is recommended to install the hood
directly into wood supports. fig 1
fig.1
center line
1
Step two: Mark your mounting points
and install the two mounting screws
provided leaving the heads out 1/4” to
mount hood. fig 1
Step three: Mount the main body of
the hood to the two screws and
4
screw into place. fig 2
3
fig. 2
Step four: Mount the top chimney
5
mounting bracket centering it above
the hood. fig.3
fig. 3