Full Product Manual

MODA
TM
WASHING MACHINE
OUTLET BOX
Job Name:___________________ Item #:______________________
Location:_________________________________________________
Engineer:____________________ Contractor:__________________
PO#:________________________ Tag:________________________
Representative:___________________________________________
SPECIFICATION
Oatey MODA
TM
washing machine outlet boxes shall be used in residential or
commercial applications requiring supply valves and a waste drain recessed in
the wall. The MODA
TM
washing machine assembly contains a valve box and a
drain box, connected by inter-locking wing flanges that can be easily
disassembled and re-assembled. Box shall be manufactured of PVC, allowing
solvent welded joints to be prepared in accordance with ASTM D2855 for PVC
drainage systems (without the use of specialty cements). The inter-locking wing
flanges shall allow installation on a single stud, between two studs or on
separate walls, without the need for additional components. Valves shall be a
two-piece design, permitting field replacement, and shall be secured with a
stainless steel retention clip. Valves are available with or without water hammer
arrestors and shall be installed upright or inverted. The assembly shall include a
removable quarter-turn knock out plug for DWV testing, and shall include an
emergency drain port for added protection from hose leaks.
Outlet Box & Brackets
PVC
Valve Body
Forged Brass C37700
Valve
Retention Clip
Stainless Steel
Valve O
-Rings
NSF Approved EPDM (2)
MATERIALS
Temperature
Rating (Valve)
250
° F / 121° C
Max Testing
Pressure (Valve)
100 psi (Air) / 250 psi
(Water)
PERFORMANCE SPECIFICATIONS
LISTINGS & CODE APPROVALS
Access BIM/Revit content through www.oatey.com
Oatey Co. | 20600 Emerald Parkway, Cleveland OH 44135 | P: 1.800.321.9532 | oatey.com
PRODUCT SELECTOR
[A]:
Assembled Width
14.13’’
[E]:
Bracket Length
8.00’’
[B]:
Box Depth
3.38’’
[F]:
Faceplate Width
6.00’’
[C]:
Box
Height 4.85’’
[G]:
Faceplate Height
6.45’’
[D]:
Bracket Width
4.00”
[H]:
Faceplate Depth
1.25”
DIMENSIONS
Jun-17
Valves
ASME A112.18.1 /
CSA B125.1
Water Hammer Arrestors
ASSE 1010
Boxes
IAPMO
-Listed, , PS-54
No Hammer Arrestors Hammer Arrestors

37601
WMOB, Copper
, NoHam, Std Pk

37617
WMOB, Copper
, NoHam, Cont Pk

37609
WMOB, Copper
, Ham, Std Pk

37625
WMOB, Copper
, Ham, Cont Pk

37603
WMOB, F1807
-Brass, NoHam, Std Pk

37619
WMOB, F1807
-Brass, NoHam, Cont Pk

37611
WMOB, F1807
-Brass , Ham, Std Pk

37627
WMOB, F1807
-Brass, Ham, Cont Pk

37604
WMOB, F2159
-PPSU, NoHam, Std Pk

37620
WMOB, F2159
-PPSU, NoHam, Cont Pk

37612
WMOB, F2159
-PPSU, Ham, Std Pk

37628
WMOB, F2159
-PPSU, Ham, Cont Pk

37605
WMOB, F1960
-Brass, NoHam, Std Pk

37621
WMOB, F1960
-Brass, NoHam, Cont Pk

37613
WMOB, F1960
-Brass, Ham, Std Pk

37629
WMOB, F1960
-Brass, Ham, Cont Pk

37606
WMOB, F1960
-PPSU, NoHam, Std Pk

37622
WMOB, F1960
-PPSU, NoHam, Cont Pk

37614
WMOB, F1960
-PPSU, Ham, Std Pk

37630
WMOB, F1960
-PPSU, Ham, Cont Pk

37602
WMOB, CPVC
, NoHam, Std Pk

37618
WMOB, CPVC
, NoHam, Cont Pk

37610
WMOB, CPVC
, Ham, Std Pk

37626
WMOB, CPVC
, Ham, Cont Pk

37608
WMOB, Push
Cnc, NoHam, Std Pk

37616
WMOB, Push Cnc, Ham, Std Pk
Side Brackets (2)
Faceplates (2)
Sticker Cover (2)
(For Debris Protection)
- Standard packs shipped with faceplates on boxes, contractor packs ship with faceplates packaged separately.
- All products sold in case packs of 12.
Accessory Components Included:
Center Support
(For Added Rigidity)
Test Plug
LocPin™
Stainless Steel Retention Clip