Use and Care Manual

Job Name Item #
Location
Engineer Contractor
PO # Tag
Representative
MODA
™
WASHING MACHINE
OUTLET BOX
TECHNICAL SPECIFICATION
SPECIFICATIONS
Oatey MODA
™
washing machine outlet boxes shall be used in residential or
commercial applications requiring supply valves and a waste drain recessed
in the wall. The MODA
™
washing machine assembly contains a valve box
and a drain box, connected by inter-locking wing anges that can be easily
disassembled and re-assembled. The inter-locking wing anges shall allow
installation on a single stud, between two studs or on separate walls, without
the need for additional components. Valves shall be a two-piece design,
permitting eld replacement, and shall be secured with a stainless steel
retention clip. Valves are available with or without water hammer arrestors
and shall be installed upright or inverted. The assembly shall include a
removable quarter-turn plug for DWV testing, and shall include an emergency
drain port for added protection from hose leaks.
DIMENSIONS
[A]:
Assembled
Width
14.13" [E]: Bracket Length 8.00"
[B]: Box Depth 3.38" [F]: Faceplate Width 6.00"
[C]: Box Height 4.85" [G]: Faceplate Height 6.45"
[D]: Bracket Width 4.00" [H]: Faceplate Depth 1.25"
Accessory Components Included:
Side Brackets (2)
Sticker Cover (2)
(For Debris Protection)
Center Support
(For Added Rigidity)
Test Plug
Faceplates (2)
APPROVALS & LISTINGS
Valves
ASME A112.18.1 / CSA B125.1
NSF / ANSI 61 & 372
Water Hammer
Arrestors
ASSE 1010
Boxes IAPMO-Listed, PS-54
FEATURES & MATERIALS
Outlet Box PVC
Valve Body Forged Brass C37700
Valve
Retention Clip
Stainless Steel
Valve O-Rings NSF/FDA Approved EPDM (2)
Temperature
Rating (Valve)
250° F / 121° C
Max Testing
Pressure
100 psi (Air) / 250 psi (Water)
Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | P: 1.800.321.9532 | Oatey.com
Access BIM/Revit content through www.oatey.com
LCS1295 10/20