Instructions / Assembly
12
Locate control where it will sense general room temperature
and NOT direct steam emission from the steam head.
Controls installed inside the steam room must be located:
• 4-5 feet above the oor near the bather seating area
• On a vertical wall
The wireless Air Tempo Control can be mounted on any vertical
surface but should follow these same location guidelines.
Locating any steam control outside of the steam room will
require the use of a Remote Temperature Sensor (page 17).
Refer to the Mr.Steam iTempo, AirTempo, and iSteam Installation
Manuals for complete control installation information.
LOCATING THE ISTEAM
®
, ITEMPO
®
,
ITEMPO/PLUS
®
,
& AIR TEMPO CONTROLS
STEAM CONTROL LOCATION
Run cable through conduit
inside wall cavity.
Cable not necessary
with AirTempo.
For Illustrative purposes only. Consult with qualified designer,
architect or contractor for steamroom construction details.
IMPORTANT The information in this guideline is designed to provide a general overview of how MrSteam products are installed. The diagrams are for Illustrative purposes only. NEVER use this document for the Installation,
Operation or Maintenance of any MrSteam product. For Installation, Operation and Maintenance information, only use the specic Installation, Operation and Maintenance manual supplied with each Mr. Steam product. The
specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product contains important information required for the safe and reliable installation and operation of the product. Failure to use
the specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product may result in product damage, property damage, death or personal injury. If you do not have an Installation, Operation
and Maintenance manual please contact MrSteam for a free copy, or download a copy from www.mrsteam.com. If you have any questions about the installation, operation or maintenance of any MrSteam product please
contact a customer or technical service representative using the contact information on the back cover of this guideline.