User manual
17
en
Faults and how to remedy
Problem Possible cause Remedy
Cord adjustment
does not work
Motor will not run
When in doubt, always consult a WOLF-Garten service workshop.
Spare parts
Ordering Number Designation of the item Description of the item
7136095 GT-F5 Cord spool (GTE 830)
49ATS0--650 GT-F10 Cord spool (GTE 840, GTE 845, Blue Power GTE 850)
Supplied by your dealer
Warranty
The warranty rules issued by our company or the im-
porter apply to every country. As part of the warranty,
we
remedy malfunctions on your appliance free of
charge provided that this malfunction is caused by a
material or manufacturing defect. In the event of a
warranty claim, please turn to your dealer or the near-
est branch office.
• Spool is empty. • Fit new spool.
• Line is torn and stuck inside spool.
• Remove spool, check tightness of winding
and replace spool in the usual way.
• Line is „welded“ to itself or to spool
through heat build-up.
• Remove welded line section, check tight-
ness of winding and replace spool in the
usual way.
• No electrical power
• Check power connection and engage a
qualified electrical professional to repair if
necessary.
• Cable damaged:
1
Attention! Electric shock through
cable damage
When the cable is cut through or
damaged, the safety fuse doesn’t al-
ways trip.
• Do not touch cable, before pulling
out the power plug from the socket.
• Damaged cable has to be completely re-
placed. Patching cable with insulating
tape is forbidden.
1
Always disconnect from the power supply before performing any work on the trimmer!