Specification

Usage
Vycor Plus self-adhered flashing is a unique solution, appropriate for working around a number of detail
areas, including, but not limited to:
Approvals
Complies with the requirements of AAMA 711 for self adhered flashing materials.
Product Data
PROPERTYPROPERTY VYCOR VYCOR PLUSPLUS
Product thickness 25 mil (0.64 mm)
Carrier film Cross-laminated HDPE
Adhesive Rubberized asphalt
Release liner Paper
Color Black-Grey
Recommended
exposure limit
30 Days
Roll width(s) 4 in. (100 mm) 6 in. (100 mm) 9 in. (100 mm) 12 in. (100 mm) 18 in. (100 mm)
Roll length(s) 75 ft (22.9 m) 75 ft (22.9 m) 75 ft (22.9 m) 75 ft (22.9 m) 75 ft (22.9 m)
Measurement markings — The membrane surface is clearly marked at 6 in. (150 mm) and 12 in. (300
mm) intervals to facilitate the installation procedure.
Highly conformable and flexible — Can accommodate settlement and shrinkage movement.
Proven track record — Vycor Plus flashing employs the same proven technology as our Grace Ice &
Water Shield —the market leader in self-adhered underlayments for over 35 years.
®
®
Long-lasting waterproofing protection — The polyethylene film and the specially-formulated rubberized
asphalt components create a water and moisture barrier that does not degrade from the effects of the
environment.
®
Window and door openings (headers, sills, jambs, thresholds, nailing flanges)
Deck-to-wall intersections
Inside and outside corners of sheathing
Wall-to-wall tie-ins
Foundation sill plates
Sheathing panel seams
Under stucco finishes
Masonry walls
Other non-roof detail areas
®
Product Data Sheets
Page 3 of 5