SDS

Titebond II Premium Wood Glue
Section 8. Exposure controls/personal protection
Hand protection
Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary.
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn, unless
the assessment indicates a higher degree of protection: safety glasses with side-
shields.
Eye/face protection
Respiratory protection
:
:
:
Body protection
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
:
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Hygiene measures
:
Skin protection
Other skin protection
:
Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Section 9. Physical and chemical properties
Physical state
Melting point
Relative density
Liquid.
Not available.
1.09
Faint odor.
Odor
pH
Yellow.
Color
Evaporation rate
Flash point
Closed cup: >93.3°C (>199.9°F) [Setaflash.]
3
Not available.
Odor threshold
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
98.889°C (210°F)
VOC (less water, less
exempt solvents)
:
5.5 g/l
<1 (butyl acetate = 1)
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid
No specific data.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
The product is stable.
Chemical stability
No specific data.
:
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Hazardous reactions or instability may occur under certain conditions of storage or use.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
Date of issue/Date of revision
:
5/22/2015.
Version
:
4
5/10