Installation Guide

TWO-GANG BOX EXTENSION
Caja Extension Adaptador Doble
Bôite Rallonge Double
GENERAL INSTRUCTIONS
1. Use to add more capacity to Bell single gang
boxes for GFCI's and other tight applications.
2. Turn off power.
3. Use only copper wire.
Installation and wiring must comply with local electrical codes.
INSTALLATION INSTRUCTIONS
1. Prepare extension for installation by inserting each screw through
the corner holes of the extension and through corresponding holes
in the sealing gasket.
2. Screw onto existing box. Make sure gasket is aligned for
a reliable seal.
3. Attach device to front surface of extension.
4. Attach cover to extension following cover installation instructions.
5. Fasten switch to cover with screws provided.
6. Fasten cover to box with remaining screws.
INSTRUCCIONES AL DORSO
INSTRUCTIONS AU DOS
HUBBELL ELECTRICAL PRODUCTS
DIVISION OF HUBBELL INCORPORATED (DELAWARE)
P.O. BOX 4002 SOUTH BEND, INDIANA 46634
CANADA 870 BROCK RD. S. PICKERING, ON L1W 1Z8
MADE IN INDIA / HECHO EN INDIA / FAIT DANS L'INDE
5407-0
LISTED 22F0
EXTENSION RING
WET LOCATIONS
LISTADA 22F0
TAPA PARA
EXTENSIÓN
SITIOS MOJADOS
ENREGISTRER 22F0
ANNEAU DE
PROLONGATEUR
ENDROITS MOUILLÉS
0 50169 54070 1