Datasheet

AEC

Heat Shrinkable Cable End Cap

──────────────────────────────────────────────────────

Applications

Designed with a layer of spiral coated hot melt adhesive in the internal surface of the end cap, which provides highly

resistant to moisture, fungus, and weathering, and recommended for use both in open air and on underground power

distribution cables with PVC, lead or XLPE sheaths.

────────────────────────────────────────────

Characteristics

Electrical insulation to 1000V

Easy installation over the cable end

Abrasion resistance and mechanical protection

──────────────────────────────────────────────────────

Operating temperature range

Operating temperature : -55˚C~110˚C

Minimum shrink temperature : 80˚C

Minimum fully recovery temperature : 120˚C

Moulded Shapes

PAGE 1
Moulded Shapes AEC Heat Shrinkable Cable End Cap ────────────────────────────────────────────────────── Applications Designed with a layer of spiral coated hot melt adhesive in the internal surface of the end cap, which provides highly resistant to moisture, fungus, and weathering, and recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths.
PAGE 2
Product Dimensions Part No. 產品型號 As supplied 收縮前 (mm) D (min.) After recovery 收縮後 (mm) D (max.) A (±10%) L (±10%) Dw (±5%) Cable diameter 電纜直徑 (mm) Standard length end caps 標準長度 AEC 1- 12/4 12 4.0 15 40 2.6 4-10 AEC 2- 14/5 14 5.0 18 45 2.2 5-12 AEC 3- 20/6 20 6.0 25 55 2.8 6-16 AEC 4- 25/8.5 25 8.5 30 68 2.8 10-20 AEC 5- 35/16 35 16.0 35 83 3.3 17-30 AEC 6- 40/15 40 15.0 40 83 3.3 18-32 AEC 7- 55/26 55 26.0 50 103 3.5 28-48 AEC 8- 75/36 75 36.