Manual

RUGGED – FLEXIBLE – VERSITILE – RELIABLE: Toro
®
570Z Series pop-up spray bodies and 570S Series shrub
adapters and shrub risers provide a durable, professional-grade solution for residential and commercial contractors
to satisfy all new installation and retrofit requirements. In combination with Toro fixed spray and rotating nozzles,
570Z and 570S Series spray and shrub models can be configured in hundreds of combinations and present an
unparalleled range of flexibility. Available in bottom-inlet shrub versions and pop-up body heights of 2”, 3”, 4”, 6”
and 12” models (side inlet thread options on 6” and 12”). 570Z and 570S Series spray and shrub models are further
available with water-saving factory-installed X-Flow
®
Technology, and/or integrated Pressure Regulating features.
Trusted for over 25 years, 570Z and 570S Series spray and shrub models are the ideal choice.
Zero Flush Wiper Seal & Ratcheting Riser
Wiper Seal helps eliminate flushing on pop-up (allows more sprinklers per zone).
Ratcheting Riser for quick and precise arc adjustment on all pop-up models.
X-Flow Technology
X-Flow in-stem flow shut-o technology built into the riser restricts water
loss by 99% should the nozzle be removed or damaged. The exclusive X-Flow
technology reduces water waste, landscape erosion, and wet hardscape
safety concerns. X-Flow also allows for ‘dry’ nozzle and filter replacement
or system maintenance while the system is running.
Pressure Regulator
Built in pressure regulation to a consistent 30 PSI is available on 570Z and 570S
shrub models. WaterSense
®
certified to prevent water waste due to misting and
fogging caused by high-pressure environments.
One-Piece Check Valve (570CV)
One-piece check valve prevents low-head drainage on elevation changes of up
to 10 feet. Available factory pre-installed or field install.
570Z & 570S SERIES SPRAY AND SHRUB BODIES
FEATURES & BENEFITS
Euent
Options
Available
Check
Valve
Options
Available