Decorative Metal Installation Instructions

page 2
MATERIAL LIST
PANEL
Divide total footage by 8 and
round up
SURFACE MOUNT
OR IN-GROUND POST
Add 1 to the total number of
panels
MOUNTING BRACKET
2 rail = 4 per panel
3 rail = 6 per panel
WALK GATE
1 per walk gate
2 per double gate
GATE HARDWARE KIT
1 per walk gate
1 per double gate
TOOLS/MATERIALS NEEDED:
POST HOLE DIGGER
SHOVEL
TAPE MEASURE
STRING LINE
MARKING PEN
ADJUSTABLE WRENCH
EYE PROTECTION
WHEELBARROW
RECIPROCATING SAW WITH BI-METAL BLADE
POWER DRILL WITH 1/8-IN * 1/2-IN METAL DRILL BITS
(masonry drill bit may be needed for surface mount post)
STAKES
GLOVES
LEVEL
CHALK
CONCRETE
BEFORE YOU BEGIN:
Check your local zoning laws.
• Local zoning laws and Home Owners Associaons may
regulate the locaon, style and height of your fence or even
require a permit signo beforehand.
• Check local codes for frost line depth and regulaons.
• Addional products and assembly may be required to meet
wind code requirements.
• Noce of acceptance (NOA) can be found at www.
miamidade.gov/building/pc-search_app.asp
• Contact your local ulies companies.
• You must have the ulity companies clearly mark your
property for electrical, gas or water lines to avoid puncturing
any unseen underground ulies.
CALL BEFORE YOU DIG: Always contact your local utility companies or call 811 before
digging to confirm the location of underground utilities.