Use and Care Manual

Clift Industries, Inc. ● PO Box 471578 ● Charlotte, NC 28247 ● 800.996.9901 ● 704.752.0031 ● Fax: [phone]
www.cliftindustries.com ● [e-mail]
Use & Care Guide
Directions: Dilute 32 ounces (1 Qt.) of Rust Vanish™ Rust Remover into 96 ounces (¾-gallon) of warm to
hot water into a plastic container. For best results, remove as much oil, dirt and other soils as possible
from the object to be cleaned. Fully immerse object to be cleaned into the solution. Periodically check
progress. De-rusting can take 5-30 minutes for light rust, 4 hours for moderate and up to 24 hours for
deep rust. Once the rust has been removed rinse cleaned object with water or dip in or sprayed on
unused, clean solution of Rust Vanish™ Rust Remover and dry thoroughly. Note: For best results, use
when solution is above 65°F/18°C. Do not leave part in solution after rust is no longer present or metal
might become dark. For a temporary rust inhibitor dip or spray unused diluted solution of Rust Vanish™
Rust Remover. CAUTION: Avoid contact with eyes and prolonged or repeated contact with skin. Use with
adequate ventilation. FIRST AID MEASURES: If swallowed, do not induce vomiting. Call physician or Poison
Center immediately. In case of eye contact, flush with water for 15 minutes. KEEP OUT OF REACH OF
CHILDREN.