Installation Guide

10
www.newageproducts.com
Using wire strippers, remove any excess plastic
sheathing before joining with wire connector caps.
Connect the black wire (in the light) with the live wire
(from the electrical box) using the pre-installed wire
connector.
Connect the white wire (in the light) with the neutral
wire (from the electrical box) using the pre-installed
wire connector.
Connect the green wire (in the light) with the
grounding wire (from the electrical box) using the
pre-installed wire connector.
Connecting the Electrical Wires
7
8
A
B
Optional: The purple and grey wires can only be used with an approved 0-10V
Low Voltage LED Wall Dimmer and low voltage wiring, which the majority of
residential housing does not have. Consult an electrician prior to installing a
dimmer switch, as standard dimmers and 120V wiring will not work.
Connect the purple wire (in the light) with the anode of the
dimmer using the pre-installed wire connector.
Connect the grey wire (in the light) with the cathode of the
dimmer using the pre-installed wire connector.