Instructions / Assembly

5 mm Allen key
5 mm Allen key
1mm 1mm
1mm
Spring tension
adjustment screw
Spring tension
adjustment screw
Depress about
10 times
1 mm 1 mm
shoe fixing nut
3. While holding the shoe against the
4. Pass the inner cable through the inner
cable lead. Set the cable with a clearance
of 1mm between each brake pad and the
5. Adjust the balance with the spring
tension adjustment screws.
6. Depress the brake lever about 10 times
as far as the grip to check that everything
is operating correctly and that the shoe
clearance is correct before using the brakes.
Allow 1mm clearance
below tire edge and brake pad.
27