Instructions / Assembly
REAR RACK ASSEMBLY
If your bike comes with a rear rack, please follow
the instructions below to attach the rack to your bike.
1. Remove any packing material and locate
the phillips head screws and washers supplied with
your rack.
2. Align holes inb the short stabilizer arms with the
holes in the top of the seat stays on your bike.
3. Insert screw and washer on both right and left
sides of the bike. Tighten securely.
4. Align holes in the long stabilizer arms with the
holes in the rear frame dropout.
5. insert screw and washer on both right and left
sides of the bike. Tighten securely.
32