Instructions / Assembly

Assembly — Installing the Light Kit
13 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
12
Attaching the light kit mounting
plate to the mounting ring
13
Remove one of the three light kit mounting plate
screws (II) from the mounting ring (XX), and loosen
the other two screws. (Do not remove.)
Place the key holes in the light kit mounting plate (I)
over the two light kit mounting plate screws (II)
previously loosened from the mounting ring (XX).
Turn the light kit mounting plate (I) until it locks in
place at the narrow section of the key holes. Secure
by tightening the two light kit mounting plate screws
(II) previously loosened and the one previously
removed.
Install the bulb and glass shade
to the light kit
Remove two glass shade thumbscrews (KK) from the
bottom of the glass shade (L). Install the glass shade
(L) onto the light kit with two glass shade thumb
screws (KK) that previously removed. Be sure to
tighten all screws.
Repeat these steps for the remaining glass shades
(L).
CAUTION: Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
II
I
XX
L
M
K
KK
Install the 13 Watt compact fluorescent bulb (M) to
the light kit (K) socket.