Specification
90° CROSS OVER
DESCRIPTION:
The Cross Over fitting allows for two pipes running perpendicular to each other to cross
by each other and be secured together. This fitting is not made to secure pipe ends
together but lets pipes continue running to where they need to go and each is secured
by one screw. Both screws are included with the fittings.
FEATURES:
PART # SIZING
INSTALLATION
SCREW (IN X MM)
a b FITS PIPE OD (IN) WEIGHT (LBS)
676-104HC 3/4in 1/4X12.5 1.5 1.24 1.050 0.44
676-106HC 1-1/4in 3/8 x 12.7 1.97 1.77 1.660 1.02
676-104HC | 3/4in
676-106HC | 1-1/4in
· Zinc coating for corrosion resistance
· Galvanized steel construction for durable
performance
· Easy installation and removal, no permanent
connections
· No special tools needed
· Use an Allen Wrench for connections
· Able to operate in temperatures ranging from
-20°C to 300°C
Distributed by B&K LLC | 8285 Tournament Drive, Suite 150 | Memphis, TN 38125
(901) 753-3200 | (800) 348-8464 | (800) 421-7724 | www.bkproducts.com
· Materials meets ASTM A-197 Standard
· Not for Plumbing Applications
· Not for Scaolding Applications
· Made to fit with SteelTek Pipe
CERTIFICATIONS & SAFETY:
California Prop 65 Warning:
This product contains chemicals including lead
known to the State of California to cause cancer
and birth defects or other reproductive harm. Wash
hands after use.
© 2017 B&K LLC
www.steel-tek.com
STS-001
04/27/17
DIMENSIONAL DATA: