Instructions / Assembly

5 2
Step One:
Put on your gloves and protective eye-wear.
Slide axle through axle brackets on the frame.
Step Two:
With valve stem facing out, slide rst wheel through
axle. Add big washer and insert cotter pin through
hole in axle. Split ends of cotter pin to hold it in place.
1
2
Step Seven:
Place tray, aligning front holes rst. Slide bolts
through both front holes. Add small washers and
nylock nuts. Tighten with ngers.
7
Big Washer
Cotter Pin Hole
Bolt
Small Washer
Nylock Nut
Valve Stem
Cotter Pin
Step Eight:
Align tray and handle. Insert bolts through tray and
handle. Add washers and nylock nuts. Tighten with
your ngers.
8
Inate Tire
Max. Ination 30psi.
Manual pump only.
Bolt
Small
Washer
Nylock
Nut