Instructions / Assembly

Page 2 of 2
EIGHT DOORS CORP
.
e-mail: [e-mail]
Website: EightDoors.com
FACTORY PRIMED & READY TO PAINT
Conditions of Sale
 The manufacturer / supplier will not be held responsible for any incidental work or expenses as a result of
bad handling or incorrect fitting / finishing.
 The manufacturer is not responsible for any finishing, priming, painting etc.
 No claim will be entered into if the door has been worked upon in any manner whatsoever.
 No claim will be entered into if the door has not been correctly installed / sealed in accordance with
instructions above. All doors must be properly sealed on all six surfaces.
 The conditions under which this door is stored, installed and sealed are beyond the manufacturer control
and therefore we cannot accept responsibility for or guarantee against shrinkage, warping or splitting
without inspection and statement from a person indicated by us.
We strongly advise against use in following locations:
 Recently plastered dwellings:
 In dwellings where concrete floors have recently been laid;
 In new build situations where central heating is used to accelerate the drying out process;
 Should this door be used in one or more of above locations we cannot accept any responsibility whatsoever
for problems arising.
HANDLING & STORAGE
radiators or direct
sunlight
air moisture content
is down
to normal
domestic levels