Data Sheet

2
Rev. 12/20
The Reelmaster 3100-D is manufactured
in Tomah, WI ISO 9002 Certified Plant.
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
Reelmaster
®
3100-D Specifications
*
REELMASTER 3100-D, MODEL 03170 REELMASTER 3100-D, MODEL 03171 w/SIDEWINDER®
ENGINE
Kubota
®
liquid-cooled diesel, 3-cylinder, 21.5 hp (16 kW) net @ 2500 RPM. High idle: 2,600 rpm, Low idle: 1,400 rpm (+/- 50 rpm). 68.5 cu. in. (1123 cm)
displacement. Tier 4 and Stage V compliant. Pressurized lubrication system with 3.5 U.S. qt. (3.3 liter) capacity. Heavy-duty, radial seal air cleaner. Fuel/water
separator with visible bowl.
CONFIGURATION
Rear mounted engine, front operator position. Rear mounted radiator. Two post ROPS and seat belt standard.
FUEL CAPACITY
7.5 gallons (28 liters). Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petroleum blend).
TRACTION DRIVE
Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport. Hydrostatic traction drive
provides infinitely variable speed in forward and reverse. 6 gallon (23 liter) hydraulic system capacity.
GROUND SPEED
Mow: 0-6 mph (0-10 km/h); Transport: 0-9 mph (0-14 km/h). Reverse: 0-4 mph. (0-6 km/h).
CONTROLS
Forward and reverse traction control pedals, mow/transport lever, hand activated park brake, ignition key switch, tilt steering wheel lock, PTO switch, throttle, joystick
control for cutting unit raise and lower (and for moving cutting units side-to-side on Sidewinder equipped models), cutting unit transport lock, reel speed and
backlap control knob.
GAUGES
Hour meter, fuel gauge, cluster gauge with glow plug and charge indicator lights, and low engine oil pressure and high coolant
temperature warning lights (high temperature safety shut off).
ELECTRICAL &
INTERLOCKS
12-volt, 585 cold cranking amps at 0° F (-18° C), 40 amps with regulator/rectifier. Traction pedal, operator presence in seat, PTO engage or disengage, and cutting
unit mow or transport safety interlock switches.
TIRES
Front: 20 x 12-10, 4-ply Turf Tread. Rear: 20 x 10-10, 4-ply Turf Tread
FRAME
Formed steel, welded steel and steel tubing.
BRAKES
Hydrostatic service brake, hand-operated parking brake.
STEERING
Power steering with tilt steering wheel.
OVERALL
DIMENSIONS
Track Width: 55" (140 cm) Overall Height: 76” (193 cm) with ROPS
Wheel Base: 56" (142 cm) Transport Width: 80" (203 cm) in 72" (183 cm) WOC, 92” (234 cm) in 85” (216 cm) WOC
Overall Length: 93” (248 cm)
WEIGHT
Approx. Weight with 27-inch Cutting Units: 1,860 lbs. (844 kg) Approx. Weight with 27-inch Cutting Units: 1,950 lbs. (885 kg)
CUTTING UNIT
CONFIGURATION
Fixed position cutting units.
Operator controlled moveable cutting units travel ±12" (30 cm)
left or right from center; total of 24" (61 cm) of infinite variability.
CUTTING UNIT
OFFSET
3" (7.6 cm) in 72" (183 cm) width of cut
10" (25 cm) in 85" (216 cm) width of cut
Maximum 15" (38 cm) in 72" (183 cm) width of cut.
Maximum 22" (56 cm) in 85" (216 cm) width of cut.
CERTIFICATION
This product complies with the American National Standards Institute (ANSI B71-4 – 2017) and European Community specifications (CE Certified). EN ISO 5395.
WARRANTY
Two-year limited warranty, refer to operators manual for details.
27" CUTTING UNITS (03189, 03190) / 32" CUTTING UNITS (03191)
TYPE
Three hydraulically-driven, balanced, 7" (17.8 cm) diameter reels. Cutting units interchangeable to all three positions.
REEL BLADE OPTIONS
8 and 11-blade reels available for 27" (68.6 cm) cutting unit. 8-blade reels available for 32" (81.3 cm) cutting unit.
HOC RANGE
Height of cut ranges 0.25”-2” (6.4-50.8 mm) standard in floating position, 1.5" to 2.5" (3.8-6.4 cm) in fixed position.
CUTTING WIDTH
72" (183 cm), or 85" (216 cm) width of cut dependent on cutting unit selection.
CLIP FREQUENCY/
BACKLAPPING
Manually controlled variable reel speed for adjustment of clip frequency. Standard on-board backlapping.
BEDKNIFE-TO-REEL
ADJUSTMENT
Dual point adjustment (DPA) of bedknife to reel.
ROLLERS
Full roller standard on rear of cutting unit and plastic front Wiehle roller.