Installation Guide

7
6.
Install 3" support brace:
a. One support brace is included with 6'
railing kits.
b. Two support braces are included with 8'
railing kits.
Install support braces evenly across span of
railing section (Fig. 8).
3" Support Brace
Fig. 8
7.
Assemble Railing Section:
Lay bottom rail on a clean smooth surface and
snap balusters into routed holes (Fig. 9). Then
repeat the process to connect the top rail (Fig. 10).
8.
Slide brackets onto ends of rails (top and bottom)
(Fig. 11).
Fig. 11
Fig. 12
Fig. 9
Fig. 10
9.
10.
Place Assembled Rail Section over Angled
Bracket Bases:
Slide assembled rail section straight between both
posts, and over each angled bracket base (Fig. 12).
Slide provided pins in top/bottom angled brackets
to lock angled brackets to base.
NOTE:
When installing angled rail and connecting the
rail section, the angled bracket base needs
to be  ipped on the opposite post based on
direction of the install.
Install two 1
1
⁄
1
⁄
1
4
⁄4⁄
" screws into the sides of each top
angled bracket, securing it to the handrail. Insert
screw caps onto each top bracket.