Installation Guide

545 Tilton Road, Egg Harbor Twp, NJ 08215 | 877.420.7245 | sales@ﬁnyl-line.com

Finyl Line T-Top Railing Can Be Installed At Angles With Three Methods/Options:

I. Using pre-molded adapters (at 22.5° or 45°)

II. Using adjustable “Swivel” brackets

III. Using ﬁeld cut angle brackets

I. 22.5°/45° Pre-Molded Adapters:

a. Measure distance between post from inside corners

(Fig. 1) that will be using the pre-molded adapter and the

next post. Subtract ¾" from that distance and that will be

the

length you will need to cut your top and bottom rails

(Fig. 1).

b. Install railing as outlined in level rail section, noting

the following:

Place adapter between brackets and posts. Pre-drill and

use the longer 3" screws provided with adapters to

connect to the post (Fig. 2).

II. Adjustable Swivel Brackets:

After posts have been installed, determine angle of railing (Fig. 3).

Fig. 1

Fig. 2

ANGLED RAIL INSTALLATION:

X-

⁄4"

Post

Adapter

Rail

Determine

Angle

Top View

Fig. 3