Installation Guide

9
545 Tilton Road, Egg Harbor Twp, NJ 08215 | 877.420.7245 | sales@finyl-line.com
Fig. 6
Fig. 8
Fig. 7
6
7
Slide the stair brackets onto the rails (Fig. 6) and place rail
section between your posts (Fig. 7).
a. Mark all bracket holes. Pre-drill all bracket holes with
1
⁄8" drill bit
(Fig. 8).
b. Drive screws through brackets into post using #10 x 1
1
⁄2"
self-tapping square drive screws (4 per bracket) (Fig. 8).
Fig. 9
8
Install side bracket screws and covers
For each installed bracket, pre-drill in the center of each
elongated hole with a
1
⁄8" drill bit (Fig. 9).
NOTE:
In some cases you will be drilling though aluminum as well
as the vinyl railing.