Instructions / Assembly

4
Assembly process
These instructions outline the step-by-step process to install a retractable screen door.
Before starting, review all instructions and become familiar with the parts included. If you
have a door screen on the interior side of the sliding door you will need to reconfigure the
lock/latch. Go to page 9 to complete this modification.
MEASURE YOUR
DOOR OPENING
This screen door is designed to fit
slider door openings between 32" and
36" without modifications. Measure
from your door trim to the center
of the stationary door frame. If your
slider door opening measures less than
32" wide, the top and bottom tracks
will require cutting. Go to page 9 to
complete this modification first.
STEP 1
ASSEMBLE COMPONENTS
Determine assembly configuration. The
screen housing should be oriented in
the center of sliding glass door over the
fixed panel.
TIP: Place housings face down on
a soft surface to protect the finish
during assembly.
Remove the screw from screen
housing top end cap.
Place end cap attachment
bracket onto end cap and
screw into place.
Repeat this step for the bottom
end cap.
End Cap
Attachment Bracket