Instructions / Assembly

7
Drive a 4" bracket screw through the top end cap
attachment bracket and spacers provided, securing the
top of the screen housing to top door frame or brick
mold.
TIP: The screen housing must be installed on the same
plane as the exterior trim. Spacers can be installed
behind the housing end cap attachment brackets for
support. See the Spacer Sizing chart for details.
STEP 3
SECURE SCREEN
Insert a housing screw into the pre-drilled screw hole at the top
of decorative housing flange on the latch side of the slider door
to hold frame in place. Do not tighten completely.
Center attachment bracket on lower track.
Drive self-drilling 1-1/4" attachment bracket
screws through the bracket and sill.
Interior View
Interior View
Interior View
.625
.375 .25
.625
.375
.625
.25
.3
75 .25
++
+
+
+
=
=
=
=1-1/4
"
1"
7/ 8"
5/8"
Spacer Sizing