Instructions / Assembly

Product modification

Minor modiﬁcations may be necessary to tailor the retractable screen to your

application. Door trim openings that measure less than 32" will require track

cutting to ﬁt the door width. Interior screen installations require a change to the

handle/lock assembly to move the lock mechanism to the inside of the home.

INTERIOR SCREEN

HANDLE MODIFICATION

Once the unit is installed, follow these

steps to move the lock mechanism to

the inside of the home.

Engage the lock and remove the (2)

screws from the handle.

Remove both handles (the grey latch

will be loose).

Remove the latch from the

slider bar and reverse it so the

logo faces inside the home.

Then press the latch over the

slider bar.

Place the handle with the lock on the

logo side of the latch.

Align and insert the screws through

the screw holes. Position the

remaining handle over the screws

and align the (6) small dimples with

corresponding indentations on the

other handle.

Tighten the (2) screws.

NARROW DOOR

TRACK MODIFICATION

Measure your door trim opening and

follow the example below to make

your modiﬁcations. Cut the ends of

the tracks that will be inserted into the

decorative housing.

EXAMPLE

32" standard door width

- 30" existing door width

= 2" total amount to be cut from

the FLAT ends of the top and

bottom tracks

After completing the modiﬁcations, please return to

the standard assembly process on page 4.