Instructions / Assembly

Spec / Model
Holding Force
Voltage Input
Current Draw
300 lbs (136 Kg)
12 VDC / 24 VDC
300 mA / 150 mA 320 mA / 160 mA 480 mA / 240 mA 510 mA / 255 mA 420 mA / 210 mA 500 mA / 250 mA
12 VDC / 24 VDC 12 VDC / 24 VDC 12 VDC / 24 VDC 12 VDC / 24 VDC 12 VDC / 24 VDC
300 lbs (136 Kg) 600 lbs (272 Kg) 600 lbs (272 Kg) 1200 lbs (545 Kg) 1200 lbs (545 Kg)
300-S 300-LED 600-S 600-LED 1200-LED1200-S
Electromagnetic Lock- Installation User Guide
General Installation Steps & Maintenance
Basic Installation Concept & Accessories
General Installation
Trouble Shooting
(Indoor Model)
1. Drill the armature plate holes in the door using the sticker template provided.
Sensor not functioning - Improper attachment of electromagnet and armature
- Modification of the PCB
Door not locked - Incorrect wiring or no power from power supply
enough that it can fully contact electromagnet along the entire length.
- Mating surface is dusty or damaged.
- Improper input voltage or wire size
Reduced holding force - Poor contact of electromagnet and armature. Be sure armature is loose
2. Attach the armature plate to the door with the hardware provided per illustration.
7. Connect the power wires according to the instruction and test the system.
8. It is recommended that you apply a light coat of silicon lubricant to the mating surface
on a monthly basis to prevent rust.
3. With the door closed, mark the door frame at the edge of the armature in order to
properly align the electromagnet to the armature.
4. Attach the mounting plate to the door frame using the self tapping screws provided.
Align the mounting plate with the mark from the previous instruction.
5. Insert the wires through the hole in the mounting plate and into the electromagnet unit.
Attach the electromagnet unit to the mounting plate with the Allen head fixing screw.
6. Screw in the anti-tamper nuts to prevent unauthorized access and to prevent the fixing
screw from loosening over time.
488 S. Royal Lane Coppell, Texas 75019 P 469.892.1122 T 866.892.1122 F 469.892.1123 [e-mail]
www.upgi.com
U1416-1