Use and Care Manual

Table Of Contents

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Assembly - Attaching the Fan Blades (continued)

Assembly - Fan without Light Kit

Attaching the switch cup

Fastening the blade assemblies to

the motor

□ Remove the three screws from the black bracket below the

fan motor assembly (D).

□ Connect the wires from the switch cup (E) to the wires

from the black bracket below the fan motor assembly (D)

by connecting the molded adaptor plugs together. Carefully

tuck all wires and splices in the switch cup.

□ Position the switch cup (E) on the black bracket below the

fan motor assembly (D) and align the three holes in the

black bracket.

□ Re-install the three screws removed in the step 1 to secure

the switch cup (E).

□ Fasten the blade assembly to the motor (D) by inserting the

alignment post into the slot on the bottom of the motor (D)

and tightening the blade bracket screws (TT). Please note

that the blade bracket screws (TT) are pre-attached into the

blade bracket (H).

□ Repeat this step for the remaining blade assemblies.